7.15 DECAL LOCATION (CONTINUED)
Key Description Part Number Note Quantity
A1 Locate decals on both sides of machine by using location of end stripe and WS Controller location
A2 Center stripe vertically based on location of WS Controller decal
A3 Detail view of thermal valve block
A4 Face of motor conduit box
A5 Attach to inside of starter door
A6 Attach to the bottom on inside of starter box
A7 Both sides of machine
A8 Attach to sub–panel inside starter box
A9 Used on VSD machines only
A10 Apply to inside of starter box on right–hand side
A11 Not used on 575V VSD machines
A12 Customer ground connection
PARTS LISTS
®SULLAIR®
1100e, 1500e, 1800e Operator’s Manual and Parts List
85
To Next Page
Loading...
