Sullair 750H - Page 3

TABLE OF CONTENTS
SECTION 1—SAFETY
5 1.1 GENERAL
5 1.2 TOWING *
8 1.3 PRESSURE RELEASE
9 1.4 FIRE AND EXPLOSION
10 1.5 MOVING PARTS
11 1.6 HOT SURFACES, SHARP EDGES AND SHARP CORNERS
11 1.7 TOXIC AND IRRITATING SUBSTANCES
12 1.8 ELECTRICAL SHOCK
13 1.9 LIFTING
13 1.10 ENTRAPMENT
13 1.11 JUMP STARTING
14 1.12 IMPLEMENTATION OF LOCKOUT/TAGOUT
15 1.13 CALIFORNIA PROPOSITION 65
16 1.14 SYMBOLS AND REFERENCES
SECTION 2—DESCRIPTION
21 2.1 INTRODUCTION
21 2.2 DESCRIPTION OF COMPONENTS
24 2.3 SULLAIR COMPRESSOR UNIT, FUNCTIONAL DESCRIPTION
24 2.4 COMPRESSOR COOLING AND LUBRICATION SYSTEM, FUNCTION-
AL DESCRIPTION
26 2.5 CAPACITY CONTROL SYSTEM, FUNCTIONAL DESCRIPTION
27 2.6 AFTERCOOLED AIR SYSTEM, FUNCTIONAL DESCRIPTION
29 2.7 AIR INLET SYSTEM, FUNCTIONAL DESCRIPTION
30 2.8 PIPING AND INSTRUMENTATION DIAGRAM—LP/HP DUAL (100-175
PSI)
32 2.9 PIPING AND INSTRUMENTATION DIAGRAM—LP/HP SINGLE (100,
150, 175 PSI)
34 2.10 PIPING AND INSTRUMENTATION DIAGRAM—HHP DUAL (100-200
PSI)
36 2.11 PIPING AND INSTRUMENTATION DIAGRAM—HHP SINGLE (200 PSI)
38 2.12 PIPING AND INSTRUMENTATION DIAGRAM—HYDRAULIC SYSTEM
40 2.13 PIPING AND INSTRUMENTATION DIAGRAM—ENGINE SYSTEM
42 2.14 PIPING AND INSTRUMENTATION DIAGRAM—LP DUAL
44 2.15 PIPING AND INSTRUMENTATION DIAGRAM—LP ENGINE SYSTEM
46 2.16 INSTRUMENT PANEL GROUP, FUNCTIONAL DESCRIPTION
47 2.17 ENGINE CONTROL MODULE, FUNCTIONAL DESCRIPTION
51 2.18 HYDRAULIC FAN DRIVE SYSTEM