Sullair 7500V User Manual

©
SULLAIR CORPORATION
Failure to follow the instructions
and procedures in this manual or,
misuse of this equipement will
WARRANTY NOTICE
INDUSTRIAL AIR COMPRESSOR
4500P, 5500, 7500, 4500PV,
5500V, 7500V: 45, 55 & 75 KW:60, 75 & 100 HP
PART NUMBER:
02250172-980-R00
KEEP FOR
FUTURE
REFERENCE
The information in this manual is current
as of its publication date, and applies to
compressor serial number:
200710010000
and all subsequent serial numbers.
USER MANUAL

Sullair 7500V Specifications

General

Brand	Sullair
Model	7500V
Category	Air Compressor
Language	English

Summary

SECTION 1 - SAFETY

1.1 GENERAL

Essential safety principles and operator responsibilities for safe compressor use.

1.2 PERSONAL PROTECTIVE EQUIPMENT

Guidelines for required personal protective equipment (PPE) for safe operation.

1.3 PRESSURE RELEASE

1.4 FIRE AND EXPLOSION

Precautions to prevent fire hazards and explosions related to compressor operation.

1.5 MOVING PARTS

Warnings about hazards associated with moving components and protective guards.

1.6 HOT SURFACES, SHARP EDGES AND SHARP CORNERS

Safety measures for avoiding contact with hot surfaces and sharp edges.

1.7 TOXIC AND IRRITATING SUBSTANCES

Handling precautions for toxic materials and air quality for breathing.

1.8 ELECTRICAL SHOCK

Safety procedures to prevent electrical shock hazards during installation and maintenance.

1.9 LIFTING

Guidelines and safety precautions for lifting and moving the compressor unit.

1.10 ENTRAPMENT

SECTION 2 - DESCRIPTION

2.5 CONTROL SYSTEM - FUNCTIONAL DESCRIPTION

2.10 VARIABLE SPEED DRIVE (VSD) COMPONENTS

2.11 VSD CONTROL SYSTEM - FUNCTIONAL DESCRIPTION

SECTION 4 - INSTALLATION

4.1 COMPRESSOR MOUNTING - SUPPORT AND LOCATION

Guidelines for selecting a stable foundation and proper location for compressor installation.

4.2 VENTILATION AND COOLING

Requirements for ventilation and cooling for air-cooled and water-cooled compressor installations.

4.3 SERVICE AIR PIPING

4.5 FLUID LEVEL CHECK

4.6 ELECTRICAL PREPARATION

Requirements for electrical wiring, grounding, and feeder cable sizing for installation.

4.7 MOTOR ROTATION DIRECTION CHECK

Procedure for verifying correct motor rotation direction at start-up.

SECTION 5 - OPERATION

5.1 ROUTINE OPERATION

SECTION 6 - MAINTENANCE

6.2 MAINTENANCE AFTER INITIAL 50 HOURS OF OPERATION

6.3 MAINTENANCE EVERY 2000 HOURS

6.4 FLUID MAINTENANCE

6.5 FILTER MAINTENANCE

6.6 AIR FILTER MAINTENANCE

6.7 SEPARATOR MAINTENANCE

6.8 TROUBLESHOOTING - INTRODUCTION

Introduction to troubleshooting common symptoms and their probable causes.