Need help?Do you have a question about the Sullair LS16 and is the answer not in the manual?
General| Model | LS16 |
|---|---|
| Power Source | Electric |
| Maximum Pressure (PSIG) | 125 PSIG |
| Voltage (V) | 460 V |
| Phase | 3 |
| Type | Rotary Screw Compressor |
| Drive | Direct |
| Cooling | Air |
General safety precautions for operating and maintaining the compressor.
Guidelines for personal protective equipment when working with the compressor.
Precautions regarding pressure release systems and valves.
Safety measures to prevent fire and explosion risks.
Precautions related to moving components of the compressor.
Warnings about hot surfaces, sharp edges, and corners.
Safety regarding toxic and irritating substances used with the compressor.
Safety precautions to prevent electrical shock.
Guidelines for safely lifting and rigging the compressor.
Safety measures to prevent entrapment within the compressor enclosure.
Overview of the Sullair rotary screw air compressor features and benefits.
Identification and description of major compressor components.
Functional description of the Sullair rotary screw compressor unit.
Functional description of the cooling and lubrication system.
Functional description of the compressor discharge system.
Functional description of the electro-mechanical control system.
Functional description of the compressor air inlet system.
Description of the instrument panel and controller.
Description of additional features for the compressor.
Detailed specifications for LS-12 and LS-16 series compressors.
Guidance on selecting and using lubricants for the compressor.
Recommendations for fluid analysis and lubricant selection.
Recommended intervals for fluid and filter changes.
Requirements for mounting the compressor securely and level.
Requirements for adequate ventilation and cooling for the compressor.
Guidelines for installing service air piping.
Information on coupling alignment requirements.
Procedure for checking the fluid level in the compressor.
Requirements for electrical preparation and wiring.
Procedure for checking the motor rotation direction.
Introduction to operating the compressor and understanding controls.
Explanation of the purpose of various controls and indicators.
Detailed purpose of each control and indicator.
Step-by-step guide for the initial start-up of the compressor.
Procedure for starting the compressor after initial installation.
Steps for safely shutting down the compressor.
Common problems and probable causes for the electro-mechanical controller.
To Next Page