Need help?Do you have a question about the Sullair LS16T and is the answer not in the manual?
General| Model | LS16T |
|---|---|
| Power Source | Electric |
| Voltage | 460V |
| Phase | 3 |
| Type | Rotary Screw |
| Maximum Pressure | 150 psi (10.3 bar) |
| Weight | 6, 700 lb (3, 039 kg) |
General safety rules, personal protective equipment requirements, and pressure release procedures.
Warnings for fire, moving parts, hot surfaces, sharp edges, and toxic substances.
Safety procedures for electrical hazards and lifting equipment.
Precautions against entrapment within the compressor enclosure.
Introduction to the Sullair compressor, its components, and functional description.
Details on cooling, discharge, and capacity control systems.
Air inlet system, Supervisor II panel, keypad, status, and lamp indicators.
Technical specifications including dimensions, pressure, and fluid capacity for LS16T.
Guidelines for fluid type, change intervals, and application recommendations.
Guidelines for compressor mounting, foundation, and ventilation.
Procedures for piping, alignment, fluid level, electrical, and motor rotation checks.
Understanding compressor controls, indicators, and their purposes.
Setting operating parameters and understanding manual/automatic modes.
Procedures for start-up, shutdown, and output relay functions.
Overview of maintenance, daily checks, and initial service.
Procedures for fluid changes, filter, and separator element replacement.
Maintenance for oil return, pressure regulators, and drive couplings.
Guide to identifying and resolving common compressor problems and their causes.
Procedures for ordering parts and a list of recommended spare parts.
Detailed diagrams and parts lists for major compressor components.
Electrical wiring diagrams for Supervisor II and cooling fan systems.
To Next Page