Need help?Do you have a question about the Sullair LS25S-300 and is the answer not in the manual?
General| Model | LS25S-300 |
|---|---|
| Voltage | 460 V |
| Phase | 3 |
| Frequency | 60 Hz |
| Weight | 1800 lbs |
| Dimensions | 72 x 36 x 48 inches |
| Type | Rotary Screw |
| Maximum Pressure | 150 PSI |
| Operating Pressure | 125 PSI |
Details the components and working principle of the compressor's intake system.
Covers components and working principle of the compressor's exhaust system.
Describes the oil piping system, its components, and functions.
Details the oil-gas separator and its functions.
Describes the water piping system for cooling.
Explains the system for automatically adjusting compressor airflow.
Details the supervisor unit, its functions, and interface.
Explains the supervisor's role in monitoring and control.
Guides on setting various operating parameters.
Outlines essential safety rules for operation.
Lists steps for preparing the compressor for its first start.
Daily checks and tasks for the compressor.
Guidelines for changing the lubricating oil.
Instructions for maintaining and replacing the oil filter.
Details on cleaning and replacing air filters.
Focuses on the maintenance of oil-gas separator elements.
Maintenance guidelines for Sullair's dedicated compressor motors.
Electrical diagram for water-cooled compressor units.
Electrical diagram for air-cooled compressor units.
Electrical diagram for high-voltage units (water and air-cooled).
Introduction to troubleshooting principles.
Table of common faults and their solutions.
To Next Page