Need help?Do you have a question about the Sullair LS-25 and is the answer not in the manual?
General| Model | LS-25 |
|---|---|
| Type | Rotary Screw |
| Drive | Direct |
| Phase | 3 |
| Voltage | 460V |
| Sound Level | 72 dBA |
Provides essential safety guidelines for compressor operation and maintenance.
Details requirements for operator safety gear.
Procedures for safe pressure release and related hazards.
Identifies fire risks and preventative measures.
Precautions related to rotating and moving components.
Warnings about contact with hot or sharp parts.
Safety measures for handling hazardous substances.
Guidelines to prevent electrical injury during operation and maintenance.
Instructions for safely lifting and moving the compressor.
Precautions to prevent personnel entrapment.
Details on suitable lubricants for standard and 24KT models.
Guidance on compressor use and recommended fluid change intervals.
Requirements for compressor placement, airflow, and service air piping.
Procedures for coupling alignment, fluid level, electrical prep, and motor rotation.
Introduction to the Supervisor system, keypad, and status displays.
Configuration of operating parameters and control functions.
Overview of maintenance monitoring and daily operational checks.
Routine maintenance overview and initial 50-hour service.
Procedures for 1000-hour service and parts replacement.
Steps for removing, inspecting, and replacing air filter elements.
Illustrations and part numbers for various compressor components.
Diagrams showing the placement of warning and identification decals.
Electrical schematics for different compressor configurations.
To Next Page