Sullair 7500 User Manual

©
SULLAIR CORPORATION
Failure to follow the instructions
and procedures in this manual or,
misuse of this equipement will
WARRANTY NOTICE
INDUSTRIAL AIR COMPRESSOR
4500P, 5500, 7500, 4500PV,
5500V, 7500V: 45, 55 & 75 KW:60, 75 & 100 HP
PART NUMBER:
02250172-980-R00
KEEP FOR
FUTURE
REFERENCE
The information in this manual is current
as of its publication date, and applies to
compressor serial number:
200710010000
and all subsequent serial numbers.
USER MANUAL

Sullair 7500 Specifications

General

Model	7500
Type	Rotary Screw
Pressure	100 - 150 psi
Cooling System	Air Cooled
Operating Pressure	100-150 PSIG

Summary

Section 1 SAFETY

1.1 GENERAL

General safety precautions for compressor operation and maintenance.

1.2 PERSONAL PROTECTIVE EQUIPMENT

Guidelines for required safety gear for personnel.

1.3 PRESSURE RELEASE

Procedures for safe pressure release in air lines.

1.4 FIRE AND EXPLOSION

Precautions to prevent fire and explosion hazards.

1.5 MOVING PARTS

Warnings regarding hazards from rotating components.

1.6 HOT SURFACES, SHARP EDGES AND SHARP CORNERS

Safety regarding hot components and sharp edges.

1.7 TOXIC AND IRRITATING SUBSTANCES

Precautions for handling hazardous materials.

1.8 ELECTRICAL SHOCK

Safety measures for electrical hazards.

1.9 LIFTING

1.10 ENTRAPMENT

Section 3 SPECIFICATIONS

3.1 TABLE OF SPECIFICATIONS - 4500P, 5500 & 7500 SERIES MODELS

Technical data for various compressor models.

3.2 TABLE OF SPECIFICATIONS - VARIABLE SPEED DRIVE MODELS

Technical data for VSD models.

3.3 COMPRESSOR SPECIFICATIONS

Section 4 INSTALLATION

4.1 COMPRESSOR MOUNTING - SUPPORT AND LOCATION

Guidelines for proper mounting and site selection.

4.2 VENTILATION AND COOLING

Requirements for air circulation and heat dissipation.

4.3 SERVICE AIR PIPING

4.6 ELECTRICAL PREPARATION

Requirements for electrical connections and safety.

4.7 MOTOR ROTATION DIRECTION CHECK

Section 5 OPERATION

5.1 ROUTINE OPERATION

Section 6 MAINTENANCE

6.8 TROUBLESHOOTING – INTRODUCTION