DHL Regenerative Dryer w/SHDC-2300 touch screen controller User Manual US-EN
Subject to EAR. ECCN EAR99 and related export control restrictions.
NOTE : Below are some concerns to be taken into account, but they do not directly involve
safety precautions.
● In designing this unit, a lot of care has been devoted to the protection of the
environment.
o For example:
● Our dryer and relevant packaging is composed of recyclable
materials.
● We employ an energy saving design.
o To keep our commitment to this goal, the user should
follow the ecological suggestions marked with this sign.
● Compressed air is a highly hazardous energy source. Do not work on the dryer with parts
under pressure. Do not point the compressed air or the condensate drain jet towards
anyone. The user is responsible for the installation of the dryer, which must be executed
based on the instructions given in the “Installation” chapter. Otherwise, the warranty will
be voided and dangerous situations for the personnel and/or damages to the machine
could occur.
● Only qualified personnel can use and service electrically powered devices. Before
attempting any maintenance, the following conditions must be satisfied:
● Ensure that the dryer is completely isolated from the power source(s)and that the
electrical panel is de-energized and verified. Perform a proper lockout/tag out.
● Ensure that the dryer is isolated from the compressed air system, fully depressurized and
a proper lockout/ tag out is performed.
● Any change to the dryer or to the relevant operating parameters, if not previously verified
and authorized by the Manufacturer, will void the warranty.
● Do not use water to extinguish fire on the dryer or in the surrounding area.
To Next Page
Loading...
