4.3 FIRST START UP
● The electrical supply voltage for Sullairs DHL dryers come standard at 110-115-120 Volts /1
Phase / 50-60 HZ . The standard electrical supply voltage will indicate 115 volts as
standard from the factory.
● PLEASE NOTE: that other electrical supply voltages can be optioned to the dryer.
The optioned electrical supplies consist of 208-220-230 Volts / 1 Phase / 50-60 HZ
and 24 volt DC. Prior to powering up the dryer, Verify the spec options of the dryer
and assure that correct voltage is applied.
● Prior to connecting to power, check all electrical connections for tightness and ensure there
are no loose or stray wires present. Once the electrical checks are completed,a qualified
electrical technician may proceed to power up the dryer. Proceed to the following
instructions,
● Turn the dryer OFF/ON switch to the ON position. Once the OFF/ON switch is in the ON
position the Sullair ID screen shown in (Figure.4.1) this will appear during the boot up
process of the program.
● Once the boot screen is present- Touch the
interactive display in order to pull up the home screen,
shown in (Fig 4.1 & 4.2)
INITIAL BOOT UP SCREEN
(Figure 4.1)
HOME SCREEN DİSPLAY MENU
(Figure 4.2)
To Next Page
Loading...
