Section 7
ILLUSTRATIONS AND PARTS LIST
37
7.7 COMPRESSOR COOLING SYSTEM
key part
number description number quantity
1 duct, cooler motor 210 frame 250026--471 1
S
duct, cooler motor 180 frame 250026--472 1
2 screw, hex serrated washer 1/4”--20 x 1/2” 829704--050 8
3 ring, aftrclr 210 frame 250034--536 1
S
ring, aftrclr 180 frame 250034--535 1
4 motor c ons ult f ac tor y 1
5 guard, fan 250028--964 1
6 f an, 12” dia c ons ult f ac tor y 1
7 screw, brass set 250031--014 1
8 ring, orifice 250034--537 1
9 insert, 1/4”--20 threaded blind 250034--538 8
10 nut, hex 5/16”--18 825305--283 1
11 plate, cooler filler 250026--843 1
12 cooler, fluid 250026--066 1
13 washer, flat 5/16” x 1 1/4” 250025--830 2
14 capscrew, ferry hd 5/16”--18 x 2” 828405--200 2
15 elbow, tube 5/8” x 7/8” 811610--088 1
16 tubing, aftercooler in 250030--042 1
17 cap, 1/2” x 3/4” tube 250026--350 1
18 tee, tube union 1/2” 811408--050 1
19 tubing, 1/2” x 3.4” 250030--040 1
20 connector, tube 1/2” x 3/4” 811808--075 2
21 elbow, tube 7/8” x 1/2” 250030--104 1
22 tubing, fluid cooler out 250030--043 1
23 tubing, 1/2”od 250030--041 1
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
