Sullair ES-8-25H - Page 57

Section 10
ILLUSTRATIONS AND PARTS LIST
51
10.7 COMPRESSOR COOLER SYSTEM AND PARTS
key part
number description number quantity
1 insert, threaded blind 6MM 02250047-083 20
2 aftercooler 250040-092 1
3 capscrew, M6 x 12MM 829306-012 10
4 cooler, oil (15,20 HP) 250039-096 1
Scooler, oil (25,30 HP) 02250086-812 1
5 nipple, pipe 3/4” x 2” 823112-020 1
6 filter, air/separator/trap (I) 02250052-689 1
7 washer, 8MM 865408-170 7
8 cover, access 02250046-910 1
9 capscrew, 8M x 16MM 829308-016 6
10 elbow, tube 3/4” 02250048-820 1
11 washer, 6MM 865706-180 8
12 tube, oil in 02250047-245 1
13 hose, medium pressure 1” x 11.25” 02250107-919 1
14 elbow, 90_ 37FL 02250048-094 1
15 angle, support cooler 02250046-915 5
16 tube, oil out 02250047-244 1
17 grommet, rubber 040125 2
18 support, cooler (15,20 HP) 02250045-567 1
Ssupport, cooler (25,30 HP) 02250048-302 1
19 cover, end coler support 02250046-911 1
20 cover, access cooler support 02250048-123 1
21 washer, 6MM 865406-125 2
22 capscrew, hex 6M x 16MM 828006-016 4
23 elbow, 90_ swivel 1/8” NPT 250025-849 1
24 connector, straight thd 02250048-819 1
25 weatherstrip, 1/2” x 1” (ft) 245738 5.5
26 foam, cooler oil/air 02250052-480 2
27 capscrew, M6 x 20MM 829306-020 8
28 foam, cooler after 02250052-481 1
(I) For maintenance on air/separator trap filter no. 02250052-689, order:
Sauto drain kit 250022-965 2
Ssight glass kit 250024-295 2
So-ring kit 02250056-270 2
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR