Sullair ES-8-25H - Section 1 Safety; 1.8 Electrical Shock Prevention; 1.9 Safe Lifting Practices

OPERATOR IS REQUIRED TO READ
ENTIRE INSTRUCTION MANUAL
TABLE OF CONTENTS
Section 1
PAGE
SAFETY 1 1.1 GENERAL
1 1.2 PERSONAL PROTECTIVE EQUIPMENT
1 1.3 PRESSURE RELEASE
2 1.4 FIRE AND EXPLOSION
2 1.5 MOVING PARTS
2 1.6 HOT SURFACES, SHARP EDGES AND SHARP CORNERS
2 1.7 TOXIC AND IRRITATING SUBSTANCES
3 1.8 ELECTRICAL SHOCK
3 1.9 LIFTING
4 1.10 ENTRAPMENT
Section 2
INSTALLATION 5 2.1 LOCATION OF COMPRESSOR
5 2.2 VENTILATION AND COOLING
5 2.3 SERVICE AIR PIPING
5 2.4 COUPLING ALIGNMENT CHECK
5 2.5 FLUID LEVEL CHECK
6 2.6 MOTOR ROTATION DIRECTION CHECK
6 2.7 ELECTRICAL PREPARATION
Section 3
SPECIFICATIONS 7 3.1 SPECIFICATIONS- ES-8
8 3.2 LUBRICATION GUIDE
8 3.3 LUBRICANT CHANGE RECOMMENDATIONS
Section 4
COMPRESSOR
SYSTEMS 13 4.1 INTRODUCTION
13 4.2 DESCRIPTION OF COMPONENTS
13 4.3 ENCAPSULATED COMPRESSOR SYSTEM,
FUNCTIONAL DESCRIPTION
13 4.4 COMPRESSOR COOLING SYSTEM,
FUNCTIONAL DESCRIPTION
13 4.5 AIR INLET SYSTEM, FUNCTIONAL DESCRIPTION
15 4.6 CONTRO L SYSTEM, FUNCTIONAL DESCRIPTION