Sullair RD-1600-460-3-60-A - Compact 3-in-1 Heat Exchanger; Heat Exchanger Components

RH SERIES—HIGH TEMPERATURE SECTION 2
16
2.5.7 COMPACT 3-IN-1 HEAT EXCHANGER
The dryers are equipped with compact heat
exchangers. This compact 3-in-1 setup has been
specially designed to dry compressed air and is
made of the following components:
1. An air-to-air heat exchanger which pre-cools
the incoming hot air with the outgoing cold
air, thereby saving a significant load on the
compressor.
2. An Evaporator which is an air-to- refrigerant
heat exchanger that cools the pre-cooled
compressed air.
3. An integrated separator that removes all
condensates and requires no additional
maintenance.
AIR/REF.
AIR INLET
DRAIN PORT
AIR OUTLET
REFRIGERANT
GAS OUTLET
REFRIGERANT
GAS INLET
AIR/AIRWATER SEPARATOR