SHOPTEK
™
USER MANUAL SECTION 3
22
02250180-090 R00
3.2 COMPRESSOR SPECIFICATIONS
3.3 LUBRICATION GUIDE
Refer to Figure 3-1 for the fluid fill port location. Sullair’s ShopTek series compressors are filled and tested at
the factory with Sullube lubricant.
3.4 APPLICATION GUIDE
Sullair encourages its customers to participate in a fluid analysis program with the fluid suppliers. In some
cases the analysis results suggest a fluid change interval which differs from the User Manual. Contact a Sullair
representative for details.
COMPRESSOR: STANDARD MODELS:
Type: Fluid Flooded Rotary Screw
Standard Operating Pressure:
115 psig (8 bar) / 125 psig (8.6 bar)/145 psig (10.0 bar)/
150 psig (10.3 bar) 175 psig (12.0 bar)/188 psig (13.0
bar)
Bearing Type: Anti-friction
Ambient Temperature (Max.) 104ºF (40ºC)
CAUTION
Do not mix different types of lubricants. Mixing
lubricants can cause malfunctions or compressor
damage: will void the compressor’s warranty.
CAUTION
Contamination of compressor fluids with mineral
oil or other fluids can cause foaming, filter
plugging, or orifice line obstruction.
To Next Page
Loading...
