SN55, SN55S, SN55V, SN75, SN75S, SN75V User Manual 3: Specifications
02250247-571 R04
Subject to EAR, ECCN EAR99 and related export control restrictions. 36
3.10 Piping & instrumentation, air-cooled—SN55, SN75
Key Description Qty
1FILTER,AIR 1
2 INDICATOR, RESTRICTION 1
3 VALVE,INLET 1
4 COMPRESSOR UNIT 1
5MOTOR 1
6 FILTER, OIL 1
7 COOLER, AIR/OIL 1
8 VALVE, THERMAL 1
9ORIFICE 2
10 GLASS, SIGHT/ORF SAE 1
11 FILTER,ASSY 1
12 PLUG,SIGHT GLASS 1
13 PROBE, THERMISTER 1
14 VALVE, RELIEF 1
15 TRANSDUCER, PRESSURE 2
16 VALVE, SHUTTLE 1
17 VALVE,MINIMUM PRESSURE CHK 1
18 VALVE, BLOWDOWN 1
19 SEPARATOR,WTR 1
20 ELEMENT,SEP 1
21 VALVE, COMBO 1
22 STRAINER, VTYPE 1
23 VALVE,SOLENOID 2
24 VALVE, PRESSURE REG 1
25 TANK, SEPARATOR 1
26 FILTER,PNEUMATIC 1
27 VALVE,CHECK 1
28 VALVE BALL/STNR COMBO 1
29 DRAIN 1
30 VENTILATOR 1
31 GAUGE,DIFF PRESS 1
Drawing notes
1
CONTROL/MOISTURE DRAIN LINES ARE 1/4" TUBING EXCEPT AS
NOTED.
2
OPTIONAL HEAT TRACE IS APPLIED ONLY TO CONTROL AND
MOISTURE DRAIN LINES AND USED ONLY WITH STAINLESS
STEEL TUBING. REFER TO FACE OF ORDER FOR HEAT TRACE
REQUIREMENTS.
3 PARTS VARY BY MODEL.
Component Description
P1 WET SUMP PRESSURE
P2 LINE PRESSURE
SOL1 LOAD/UNLOAD SOLENOID VALVE
SOL4 MEC/SEQUENCING/FULL LOAD SOLENOID VALVE
SOL5 COMBO DRAIN/JZL DRAIN SOLENOID VALVE
T1 WET DISCHARGE TEMPERATURE
Tubing color Purpose
BLUE TANK PRESSURE
YELLOW REGULATOR PRESSURE
RED UNLOAD PRESS
CLEAR WATER DRAIN
Key Description Qty
To Next Page
Loading...
