Section 11
ILLUSTRATIONS AND PARTS LIST
99
11.12 SUMP AND PARTS
key part
number description number quantity
1 connector, tb-m str thd ss 1/4 x 7/16 870904-044 1
2 tee, male pipe brass 1/4 869825-025 1
3 elbow, pipe 90m/f 1/4 x 1/4 860704-025 1
4 bulkhead, pipe 1/2” npt 841500-008 1
5 tubing, stnls stl 1/4” 20 ga 841215-004 3
6 washer, pl-b reg pltd 1/2 838208-112 4
7 washer, spr lock reg pltd 5/8 837810-156 8
8 washer, spr lock reg pltd 1/2 837808-125 4
9 capscr, hex gr5 1/2-13 x 1 1/2 829108-150 4
10 capscr, hex gr5 7/16-14 x 2 829107-200 8
11 capscr, hex gr5 1/4-20 x 1/2 829104-050 1
12 adapter, female pipe 5/8 x 1/4 811505-025 2
13 plug, pipe 1/2” 3000# stl 807800-020 1
14 elbow, tube-m 1/4” swglk ss 250211-005 2
15 connector, tube-f 1/4” swglk ss 250139-044 1
16 plug, o-ring boss sae 1 1/4 040029 1
17 separator, air/oil secondary LS-200 (I) 02250146-963 1
18 separator, air/oil primary LS-200 (I) 02250146-962 1
19 support, sight glass 02250134-697 1
20 tube, nylon 1/2” o.d. 02250134-505 1
21 elbow, tube-m 1/2” compr 02250134-504 1
22 insert, nyl tbg 1/2 od x .062 w 02250134-503 2
23 connector, tube 1/2tube x 1/2npt 02250134-500 1
24 valve, min pressure 2-1/2”-sae (II) 02250129-374 1
25 sightglass, orf block sae 02250126-129 2
26 tank, air/oil separator 02250125-995 1
27 orifice, plug brass 1/8”npt x 1/32” 02250125-774 2
28 filter, asembly genisis filter (III) 02250117-782 2
(I) For maintenance on air/fluid separator, order primary replacement element kit no. 022250146-964, and
secondary replacement element kit no. 02250146-965.
(II) For maintenance on minimum pressure valve no. 02250129-374, order repair kit no. 250018-456, or pis-
ton kit no. 02250051-336, or cap kit no. 02250044-355.
(III) For maintenance on genesis filter assembly no. 02250117-782, order replacemenet filter no. 02250117-
782.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
Continued on page 101
To Next Page
Loading...
