Section 3
SPECIFICATIONS
21
Figure 3-2A Piping and Instrumentation- LS-200 and VCC-200 Air-cooled with Electro-mechanical Controller
key part
number description number quantity
1 fltr, air h.d.inlet 12" 02250059-096 1
2 vlv, air inlet 6" 20-100 02250145-632 1
3 motor - 1
4 compressor unit - 1
5 tnk,sep ls20 leak-free 02250125-995 1
6 sep, air/oil primary LS-200 02250146-962 1
7 sep, air/oil secondary LS-200 02250146-963 1
8 vlv, rlf 3/4" 200# 550scfm 02250097-349 1
9 vlv, min press 2-1/2"sae 02250129-374 1
10 clr, comb oil/air 100hp 02250145-278 1
11 sep, wtr d-h 2"fnpt 1/4"drn 02250144-632 1
12 element, thermal valve 175ºF 049542 1
•element, thermal valve 190ºF 250028-762 1
13 fltr, fl 1-5/8"sae str thrd con 02250054-605 1
14 gauge, vacuum 0-30" water 250003-797 1
15 sw, htm 240 deg f-3/4"sae 02250100-095 2
16 ga, temp 100-250 deg f-3/4"sae 02250100-096 1
17 gauge, press 2"dia 0-230# 250005-185 2
18 gauge, diff press 0-15 psi 250003-798 1
19 gauge, diff press 0-30 psi 250003-799 1
20 switch, press 0-150# spdt n1 040694 1
•switch, press 10-250# spdt open 046344 1
21 strainer, v-type 300psi x 1/4 241771 3
22 valve,shuttle 1/4"(dbl chk) 408893 2
23 valve, pressure regulator 250017-280 1
24 valve,sol 3wno 1/4" 235# n4 02250125-657 2
25 valve, 2-way pneumatic 1/2"npt 02250100-042 1
26 orifice, .031" 02250132-934 1
27 plug, sight glass 1-7/8"sae 02250097-611 2
28 vlv, ball 3/4"sae-m x 1/2"nptf 02250098-303 1
29 fltr, assembly genisis filter 02250117-782 2
30 glass, sight/orf blk sae 02250126-129 2
31 orf, plug brass 1/8"npt x 1/16" 02250125-775 2
32 valve, ball 1/4"npt 047115 1
33 vlv, sol 2wnc mo 1/4 200# n4 02250125-674 1
POWER FAILURE RESTART (OPTIONAL):
40 switch, press no close @ 15# 043428 1
EES (OPTIONAL):
41 vlv, sol 4way 1/4 150# n4 02250125-673 1
42 cylinder, pneumatic 7/8, 4"str 241906 2
Part varies by model.
Omit item #26 with VCC-200 model.
Continued on page 23