Sumitomo HF-320a Series - Operation Panel Parameter

F-74
6
6.21 Operation panel parameter
6.21.1 Prohibition of key operations and parameter settings
 : Prohibition of change of parameter setting
 : Prohibition of panel operation (FC)
 : Prohibition of panel operation (RUN/STOP keys)
 : Prohibition of panel emergency stop operation
 : Prohibition of panel reset operation
 : Prohibition of change of / during operation
• Function
These parameters allow you to prohibit the operation of the RUN and STOP keys on the operation
panel and the change of parameters. Using these parameters, you can also prohibit various key
operations.
[Parameter setting]
Title Function Adjustment range Default setting

Prohibition of change of parameter
setting
0: Permitted, 1: Prohibited
0

Panel operation prohibition (FC)
0: Permitted, 1: Prohibited
0

Prohibition of panel operation
(RUN/STOP keys)
0: Permitted, 1: Prohibited
0

Prohibition of panel emergency stop
operation
0: Permitted, 1: Prohibited
0

Prohibition of panel reset operation
0: Permitted, 1: Prohibited
0

Prohibition of change of
/ during operation
0: Permitted, 1: Prohibited
1
■ Resetting method
Only the  parameter is designed so that its setting can be modified even if 1 (prohibited) is selected.