Sumitomo HF-320a Series - Input Signal Selection

F-5
6
6.2 Input signal selection
6.2.1 Priority selection (both FR-COM, RR-COM are ON)
 : Priority selection (both FR-COM, RR-COM are ON)
• Function
This parameter allows you to select the direction in which the motor runs when a forward run (FR)
command and a reverse run (RR) command are entered simultaneously.
1) Reverse
2) Slowdown stop
■ Parameter setting
Title Function Adjustment range Default setting

Priority selection (both FR-COM, RR-
COM are ON)
0: Reverse
1: Slowdown stop
1
[ =  (Stop)]: If an FR command and an RR command are entered simultaneously,
the motor will slow down to a stop.
Forward run
Reverse run
Run forward signal
Run backward signal
ON
OFF
ON
OFF
Output frequency [Hz]
Set frequency
Time[s]0