To adjust the quality of the TV sound ...
1. Press SETUP on the infrared hand unit.
2. Press CH
to select Sound.
3. Press VOL
to accept this selection.
4. Press CH
to select a Sound option.
5. Press VOL
to adjust the selected Sound option.
To adjust any of the Sound options, hold down
VOL+ to increase and VOL- to decrease the
adjustment. The sliding color bar that appears
on the screen increases and decreases as
adjustments are made. So does the number
(from 0 to 100) that appears above the bar.
Generally, the standard point on the bar or
about 50 is a good level.
16
Owner's Manual
Contrast - Select CH Contrast to adjust the overall contrast of the picture.
Hold down the VOL+ button to increase or the VOL- button to reduce contrast.
Brightness - Select CH Brightness to adjust the brightness of the picture.
Hold down VOL+ to increase or the VOL- to reduce brightness.
Sharpness - Select CH Sharpness to adjust the overall sharpness of the
picture. Hold down VOL+ to increase or VOL- to decrease the sharpness.
Color - Select CH Color to adjust the amount of color in the picture. Hold
down VOL+ to increase or VOL- to reduce the color.
Tint - Select CH Tint to adjust the color of the flesh tones. Hold down VOL+
button to increase or VOL- to reduce skin color.
15
Owner's Manual
How do I adjust the quality of the TV sound?
To Next Page
Loading...