Speaker
When the speaker is turned off, viewers can hear the TV only with an ear
phone or a head set. The speaker may be turned on in some levels of service
and turned off in others.
To turn the speaker on and off ...
Select CH Speaker.
Press VOL to accept this selection.
Press CH to select a service level.
Press VOL to turn the speaker off or on.
Remember, if you connect a head set or ear phones to the EARPHONE jack,
you will only hear through this listening device, even when the speaker is on.
The TV will display this reminder, "ear phone only" for a few seconds after a
channel change to indicate the speaker is not available. Once the listening
device is removed from the ear phone jack, the sound will come from the TV
speaker, providing the speaker has been programmed "ON" in that service
level.
Volume Limit
When a patient increases the volume either by pressing VOL+ on the infrared
hand unit or on the control panel of the TV, the audio level will not increase
beyond the setting of the volume limit.
To change the volume limit ...
Select CH Volume Limit
to control the limit of the sound that the TV can
produce.
Press VOL to accept this selection.
A sliding color bar appears on the screen and increases or decreases as you
make changes. So does the number (from 0 to 100) above the bar. When the
TV operates at the maximum sound limit, the number showing is 100.
Hold down VOL- to reduce the maximum sound limit.
Hold down VOL+ to increase, up to 100, the maximum sound limit.
22
Owner's Manual
To change the Features of the TV
1. Press SETUP on the infrared hand unit.
2. Press CH
to select Features.
3. Press VOL
to accept this selection.
4. Press CH
to select a Features option.
5. Press VOL
to change the selected
Features option.
Marquee
A Marquee channel is a message or promotional channel.
The content is on the selected channel before the TV is installed in the
hospital. The messages are used to inform viewers and to advertise services.
When a Marquee channel is programmed to a selected service level, it is
always the first channel to appear when the TV is turned on.
To assign a Marquee channel to a level of service ...
Select CH Marquee.
Press VOL to accept this selection.
Press CH to select a service level.
Enter the number of the Marquee channel on the digit keys of the infrared hand
unit, to assign it to this selected service level. The channel number now
appears beside the selected rental service and the TV tunes to this channel as
confirmation of the selection.
To turn off the Marquee channel, enter channel 0.
21
Owner's Manual
How do I change the features of the TV?How do I change the features of the TV?
Main SETUP MENU
SETUP MENU
Rental: Free
Picture
Sound
Channel Setup
FF ee aa tt uu rr ee ss
Blocking
Language: English
TO Select
+ - To Accept
To Next Page
Loading...