TRLD-44 is not available with Flash Tube
Lighting Instructions
Before Lighting:
Check gas line/hose for signs of wear, abrasion or cuts. If evidence of deterioration is visible, replace the
part prior to use.
If you smell gas, check for leaks. If odor continues, immediately call for service.
Keep your face and body away from the grill top when lighting.
Grill and Rotisserie Burner Lighting
1. Open lid before lighting. Make sure all knobs are in the
‘OFF’ position. (REMOVE WARMING RACK BEFORE USING ROTISSERIE)
2. Push and turn burner knob slowly to ‘HI’ position, a clicking will occur.
3. Repeat step 2 until unit lights.
4. If the burner does not ignite within 4 seconds, turn the gas off,
wait for 5 minutes and then repeat steps 1 and 3.
5. For complete shut down, turn all knobs to the ‘OFF’
position. For LP, also turn the cylinder valve off when not in use.
To Next Page
Loading...
