EasyManua.ls Logo

Summit Professional SPFF51OS - User Manual

Summit Professional SPFF51OS
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OUTDOOR & INDOOR FROST-FREE
REFRIGERATORS and FREEZERS
RÉFRIGÉRATEURS et CONGÉLATEURS
SANS GEL à l'EXTÉRIEUR et à l'INTÉRIEUR
MODELS / MODÈLES :
Refrigerators / Réfrigérateurs: ALR15B / FF1532B / FF1532X / FF1532XCSS
SPR316OS / AL54 / FF64B / FF64BSS / SPR627OS / SPR628BCSS
SPR629WCSS / ASDS1523 / LASS1544 / ADSS1553 / SDS1528 / LR1548
SDSS1557 / ASDS2413 / LASS2432 / ADSS2443 / SDS2417 / LRS2436
SDSS2447 / SPR618OSADA / LASD2418 / SPR618OS / ASDS2413CSS
LASS2432CSS / ADSS2443CSS
Freezers / Congélateurs: SCFF1533B / ALFZ53 / LFZ24A / SCFF53BSSADA
SCFF52W / SCFF53B / SCFF53BSS / SPFF51OS
Instruction Manual / Mode d’emploi
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
AVANT L'UTILISATION, VEUILLEZ LIRE ET SUIVRE TOUTES LES REGLES DE SECURITE ET LES
INSTRUCTIONS D'UTILISATION.
Felix Storch, Inc.
ISO 9001:2015 registered company
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance.com
Write Model and Serial Nos. (on lower left corner
of inside cabinet) here:
Inscrivez les numéros de modèle et de série
(dans le coin inférieur gauche de l'armoire
intérieure) ici:
Model No.: _______________________
Serial No.: _______________________

Table of Contents

Questions and Answers

  • D
    Deanna WestSep 15, 2025
    What does it mean if the icon “--” is lit and flashing in the temperature display of my Summit Professional SPFF51OS?
    • C
      Christina HarrellSep 16, 2025
      The icon “--” is lit and flashing in the temperature display because only temperatures within the range 0~99°F/-9~37°C for FF1532B / SPR316OS / SPR627OS / FF64B / FF64BSS and the range -49~99°F/- 45~37°C for SCFF1533B / SPFF51OS / SCFF53B / SCFF53BSS / SCFF52W can be displayed. If the temperature is not within this range, the icon “--” will be displayed instead. This is normal.
  • D
    Daryl ScottAug 25, 2025
    Why is my Summit Professional SPFF51OS not cold enough?
    • V
      Victoria CalderonAug 25, 2025
      If your Summit Professional Refrigerator is not cold enough, check the set temperature and adjust if necessary. The ambient temperature may require a lower setting. Avoid opening the door too often and ensure it closes completely and seals properly by cleaning or replacing the door seal if needed. Additionally, a dirty condenser or blocked ventilation opening can cause this issue; clean the condenser and clear any obstructions from the ventilation.
  • C
    Cody PerryAug 25, 2025
    How to troubleshoot a Summit Professional SPFF51OS Refrigerator that does not operate?
    • N
      Nancy MillerAug 26, 2025
      If your Summit Professional Refrigerator does not operate, first ensure it is properly connected to a power supply. Next, check if the appliance is switched on. Also, verify that the circuit breaker has not tripped or a fuse has blown; if so, switch on the circuit breaker or replace the fuse.
  • T
    Terri GuerraAug 27, 2025
    Why does my Summit Professional Refrigerator make so much noise?
    • J
      Jenny GregoryAug 27, 2025
      If your Summit Professional Refrigerator seems to make too much noise, the rattling noise may come from the flow of the refrigerant, which is normal. As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your appliance. If temperature fluctuations occur, the contraction and expansion of the inner walls may cause popping and crackling noises. Also, ensure the appliance is properly leveled with the adjustable feet.
  • M
    Mary GonzalezSep 16, 2025
    What to do if my Summit Professional Refrigerator displays “E0”, “E1”, “E2”, “E3”, “E4”, “E5” or “E7”?
    • K
      Kristina RothSep 16, 2025
      For “E0”, “E1”, “E2”, “E3”, “E4”, “E5” or “E7” errors on your Summit Professional Refrigerator, call for service.
  • J
    julie73Sep 23, 2025
    What does error code E0, E1, E2, E3, E4, E5, or E7 mean on my Summit Professional Refrigerator?
    • D
      Dustin HarrisSep 23, 2025
      The error codes displayed on your Summit Professional Refrigerator indicate specific issues: * “E0” indicates a communication error for 3-zone models. * “E1” or “E2” indicates that the air temperature sensor has failed. * “E3” or “E4” indicates that the defrost sensor in the evaporator has failed. * “E5” indicates a defrost heater failure. * “E7” indicates a door switch failure. Call for service.
  • D
    David HesterSep 8, 2025
    What to do if the alarm sounds and the temperature display flashes on Summit Professional SPFF51OS Refrigerator?
    • J
      Jessica SanchezSep 8, 2025
      If the alarm sounds and the temperature display flashes on your Summit Professional Refrigerator, and the door hasn't been open for more than 60 seconds, it indicates the temperature has deviated from the set point. This could be due to opening the door too often, obstructions in the ventilation, a power interruption, or adding a large amount of food. To resolve this, avoid opening the door unnecessarily, clear any obstructions from the ventilation, and allow the refrigerator time to reach the set temperature.
  • E
    Erik FrazierSep 9, 2025
    How to fix a Summit Professional SPFF51OS door that will not close properly?
    • W
      wriveraSep 9, 2025
      If the door of your Summit Professional Refrigerator won't close properly, check if the appliance is level and adjust the feet if necessary. Inspect the door hinge and reassemble it correctly if it was reversed. Also, clean the door gasket and ensure the shelves are correctly positioned.
  • J
    Jordan FisherSep 2, 2025
    Why does my Summit Professional Refrigerator keep turning on and off?
    • A
      ashleyschwartzSep 2, 2025
      This could be due to a few reasons. The room temperature might be higher than average, consider moving the appliance to a cooler place. Adding a large amount of food at once can also cause this; allow the refrigerator time to reach the set temperature. Avoid opening the door too often or not closing it properly. Also, check the door seal and clean or replace it if it's not sealing properly.
  • R
    robert35Aug 31, 2025
    How to fix a Summit Professional SPFF51OS Refrigerator that won't turn on?
    • H
      Holly BradleySep 1, 2025
      First, ensure the refrigerator is properly connected to a power supply and switched on. Check your circuit breaker or fuse box; a tripped breaker or blown fuse could be the cause. Reset the breaker or replace the fuse if necessary.

Summit Professional SPFF51OS Specifications

General IconGeneral
BrandSummit Professional
ModelSPFF51OS
CategoryRefrigerator
LanguageEnglish

Related product manuals