Page 4
STEP #2
Check the Electrical Supply Requirements
This product must be installed in accordance with national, state and local
electric codes. Here are the electrical requirements for Model B41602:
Maximum Connected Load: 2400 watts
Required Power Supply Input: 240VAC/10A/60Hz
Minimum Wire size: #12AWG
The supply must be from an individual grounded circuit that is protected by a
circuit breaker and rated per the specifications as shown above.
Warning: If the electric power supply does not meet
the product specifications, consult with a licensed
electrician before proceeding with installation.
!
To Next Page
Loading...
