EasyManuals Logo

Sun Microsystems GDM-5510 Quick Setup Guide

Sun Microsystems GDM-5510
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1
EN
Safety Instructions
Observe the following safety guidelines when connecting and
using your monitor:
Be sure that your monitor is electrically rated to operate with
the AC power available in your location.
Locate your monitor near an easily accessible electrical outlet.
Place the monitor on a solid surface and treat it carefully. The
screen can be damaged if dropped, sharply hit, or touched with
a sharp or abrasive implement.
Put your monitor in a location with low humidity and a
minimum of dust.
Never use your monitor if the power cable has been damaged.
Do not allow anything to rest on the power cable, and keep the
cable away from where people could trip over it.
Never insert anything metallic into the monitor openings.
Doing so may create the danger of electric shock.
To avoid electric shock, never touch the inside of the monitor.
Only a qualified technician should open the monitors case.
Be sure to hold the plug, not the cable, when disconnecting the
monitor from an electrical outlet.
Openings in the monitor cabinet are provided for ventilation.
To prevent overheating, these openings should not be blocked
or covered. Also, avoid using the monitor on a bed, sofa, rug,
or other soft surface. Doing so may block the ventilation
openings in the bottom of the cabinet. If you put the monitor in
a bookcase or some other enclosed space, be sure to provide
adequate ventilation.
Do not expose the monitor to rain or use it near water. If the
monitor accidentally gets wet, unplug it and contact your
service representative immediately. You can clean the exterior
of the monitor with a damp cloth when necessary, but be sure
to unplug the monitor first.
If your monitor does not operate normally-in particular, if there
are any unusual sounds or smells coming from it-unplug the
monitor immediately and contact your service representative.
Quick Specifications
AC input voltage/current 100 to 240 V, 50 60 Hz, 2.0 1.0 A
Power consumption Approx. 135 W
Operating Temperature 10 °C to 40 °C
Dimensions Approx. 501 × 508 × 505 mm (w/h/
d) (19
3
/4 × 20 × 20 inches)
Mass Approx. 31.5 kg (69 lb 7 oz)
This package contains
Monitor display
USERS MANUALS (includes Quick Setup Guide and
Operating Instructions).
Identifying parts and
controls
1 INPUT (input) switch
This switch selects the INPUT 1 (video input 1 (13W3)
connector: y1) or INPUT 2 (video input 2 (HD15)
connector: y2).
2 MENU button
This button is used to display or close the menu.
3 Control button (OK, M/m)
This button is used to make adjustments to the monitor and
call up the CONTRAST menu directly.
4 ! (power) switch and indicator
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on, and lights up
in orange when the monitor is in power saving mode.
INPUT
MENU
OK
12
12 3 4

Other manuals for Sun Microsystems GDM-5510

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sun Microsystems GDM-5510 and is the answer not in the manual?

Sun Microsystems GDM-5510 Specifications

General IconGeneral
BrandSun Microsystems
ModelGDM-5510
CategoryMonitor
LanguageEnglish

Related product manuals