Preface xxi
Caution – The surface of the SuperSPARC
TM
and hyperSPARC
TM
CPU chips may be
hot and cause personal injury if touched. Avoid contact.
Caution – Improper handling by unqualified personnel can cause serious damage to
this equipment. Unqualified personnel who tamper with this equipment may be
held liable for any resultant damage to the equipment.
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wriststrap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
Individuals who service this equipment must observe all safety precautions and
ensure compliance with skill level requirements, certification, and all applicable local
and national laws.
Procedures in this document must be performed by trained maintenance providers.
Only people who have been trained by the Sun MicrosystemsTMâ„¢ training facilities
(or by Sun Microsystems affiliates) and have been certified as required by local and
national laws are considered qualified.
Note – Prior to performing service or repair, carefully read the associated procedure.
If a similar repair has not been performed on comparable equipment, do not attempt
to perform the procedure.
To Next Page
Loading...
Need help?
General
