Sun Microsystems StorageTek 2500 Series Release Notes

4 Sun StorageTek 2500 Series Array Release Notes • April 2007
■ Sun StorageTek 2500 Series Array Hardware Installation Guide (Hardcopy)
■ Accessing Documentation guide
Sun StorageTek 2501 Array Expansion Kit
Ship kit for each 2501 expansion tray:
■ AC power cords
■ Two copper SAS cables (one per I/O module)
■ One pair left and right end caps (plastic bezels)
■ Accessing Documentation guide
Management Software
The Sun StorageTek Common Array Manager software (5.1.2 and above) provides
you with an easy-to-use interface to configure, manage, and monitor Sun StorageTek
storage systems, including the Sun StorageTek 2500 Series Array. You can also use
the Common Array Manager software to diagnose problems, view events, and
monitor the health of your array. Each release of the Common Array Manager
provides the latest firmware updates for all the arrays it supports and provides the
means to upload the firmware to them.
The Common Array Manager is the only supported management software for the
2500 Series Array. Refer to the Release Notes and other Sun StorageTek Common
Array Manager documentation described in “Release Documentation” on page 18.”
Release Firmware
Release 1.0 of the Sun StorageTek 2540 Array supports firmware release 6.17.52.10.
TABLE 1 lists the firmware files for Release 1.0. Updates to the firmware are included
with releases of the Sun StorageTek Common Array Manager software or patches.
For a listing of the firmware files in subsequent releases, refer to the Sun StorageTek
Common Array Manager Release Notes or patch notes.
After you install the CAM software, these files will be located in:
■ Solaris: /var/sadm/swimages/2540
■ Windows: <system drive>:\Program Files\Sun\Common Array
Manager\Component\SunStorageTekArrayFirmware\
■ Linux: /opt/sun/cam/share/fw/

Sun Microsystems StorageTek 2500 Series Specifications

General

Brand	Sun Microsystems
Model	StorageTek 2500 Series
Category	Speaker System
Language	English