showautologout(8)
System Administration 297
NAME showautologout - display the session timeout time of the XSCF shell
SYNOPSIS showautologout
showautologout -h
DESCRIPTION The showautologout(8) command displays the session timeout time of the XSCF
shell.
The session timeout time is displayed in units of minutes. If the session timeout
time has not been specified with the setautologout(8) command, a time of 10
minutes is set by default.
Privileges You must have one of the following privileges to run this command:
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXAMPLES
EXAMPLE 1 Displays the session timeout time of the XSCF shell.
EXAMPLE 2 Displays the session timeout time of the XSCF shell (the time is default).
EXIT STATUS The following exit values are returned:
SEE ALSO setautologout(8)
-h Displays usage statement.
XSCF> showautologout
30min
XSCF> showautologout
10min
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
Need help?
General
