Need help?Do you have a question about the Sun Microsystems Sun Fire V890 and is the answer not in the manual?
General| Manufacturer | Sun Microsystems |
|---|---|
| Model | Sun Fire V890 |
| Category | Server |
| Form Factor | Rackmount |
| Operating System | Solaris |
| Memory | Up to 64 GB |
| Hard Drives | Up to 12 drives |
| Network Interface | 10/100/1000 Mbps Ethernet |
| Power Supply | Dual redundant power supplies |
| Weight | 165 lb (75 kg) |
Introduction to the Sun Fire V890 server, its features, and supported processors.
Key features enhancing system uptime, data integrity, and ease of service.
Overview of the system's front panel controls, including LEDs, Power button, and keyswitch.
Information on installing/removing components while the system is running.
System features for monitoring and protecting against temperature and airflow issues.
Step-by-step guide for installing the Sun Fire V890 server and initial setup.
Information on CPU/Memory boards, processors, cache, and memory slots.
Overview of PCI buses, slots, hot-plug features, and card compatibility.
Information on power supply units, redundancy, hot-swap capability, and output voltages.
Details on FC-AL disk backplanes, dual-loop configurations, and split/full configurations.
Description of PCI FC-AL host adapter cards for controlling storage loops.
Overview of on-board Gigabit and Fast Ethernet interfaces and rear panel connectors.
Steps for choosing a host name and IP address for the primary network interface.
Procedure for adding and configuring extra network interfaces on the system.
Capabilities for monitoring system power, fans, and temperatures via OpenBoot.
Functionality for automatic fault isolation and OS restoration after hardware failures.
Introduction to software tools for system configuration, monitoring, and management.
General safety precautions, symbols, and compliance statements for Sun Microsystems products.
To Next Page
