Sun Microsystems Sun Fire V890 User Manual

32 Sun Fire V890 Server Owner’s Guide • May 2004
3. Connect the terminal’s power cable to an AC outlet.
4. Set the terminal to receive:
■ At 9600 baud
■ An 8-bit signal with no parity and 1 stop bit
See the documentation accompanying your terminal for more information.
What Next
You can now issue system commands and view system messages. Continue with
your installation or diagnostic procedure as needed.

Sun Microsystems Sun Fire V890 Specifications

General

Brand	Sun Microsystems
Model	Sun Fire V890
Category	Server
Language	English