42 Sun Fire V890 Server Owner’s Guide • May 2004
7. Turn the keyswitch to the Locked position, remove the key, and keep it in a secure
place.
This prevents anyone from accidentally powering off the system.
What Next
The system’s front panel LED indicators provide power-on status information.
For more information about the system LEDs, see “About the Status and Control
Panel” on page 11.
If your system encounters a problem during system start-up, and the keyswitch is in
the Normal position, try restarting the system with the keyswitch in the Diagnostics
position to determine the source of the problem. Turn the front panel keyswitch to
the Diagnostics position and power cycle the system.
How to Redirect the System Console
to RSC
Perform this procedure if, after installing the Solaris Operating System and the RSC
software, you want to configure the system to use RSC as the system console. For
more information about RSC, see “About the System Controller Card and RSC
Software” on page 59 and “About Sun Remote System Control Software” on
page 133.
Locked
position
To Next Page
Loading...
