EasyManua.ls Logo

Sun Microsystems Sun Fire V890 - Lithium Battery

Sun Microsystems Sun Fire V890
227 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
180 Sun Fire V890 Server Owner’s Guide September 2004
The following caution applies only to devices with a Standby power switch:
Lithium Battery
System Unit Cover
You must open the side doors of your Sun Fire V890 server to add cards, memory, or internal options. Be sure to close
and secure the doors before powering on your system.
Caution The power switch of this product
functions as a standby type device only. The
power cord serves as the primary disconnect
device for the system. Be sure to plug the
power cord into a grounded power outlet that
is nearby the system and is readily accessible.
Do not connect the power cord when the
power supply has been removed from the
system chassis.
Caution The Sun Fire V890 system I/O
board contains lithium batteries. Batteries are
not customer replaceable parts. They may
explode if mishandled. Do not dispose of the
battery in fire. Do not disassemble it or
attempt to recharge it.
Caution Do not open. Qualified Service
Personnel Only. Failure to take this precaution
may result in personal injury and system
damage.

Table of Contents

Other manuals for Sun Microsystems Sun Fire V890

Related product manuals