Need help?Do you have a question about the Sun Microsystems Sun Fire X2100 and is the answer not in the manual?
Details the key hardware and software components of the Sun Fire X2100 Server.
Covers the supported operating systems and supplemental software included with the server.
Describes the physical layout and components of the server's front, rear, and internal structure.
Explains the procedures for safely powering the server on, powering it off, and handling power interruptions.
Lists components that can be ordered as additional parts or replacements for the server.
Outlines initial questions to ask and general approaches for troubleshooting server problems.
Describes how to perform external and internal visual checks for hardware problems.
Provides step-by-step solutions for common server problems and error conditions.
Lists contact information and resources for obtaining further technical support from Sun Microsystems.
Introduces the Pc-Check utility and its capabilities for testing server hardware.
Details the options available in the System Information menu for viewing hardware details.
Describes specific hardware tests for components like processor, memory, disks, and more.
Explains how to run burn-in test scripts for comprehensive hardware testing.
Covers creating and saving custom burn-in test scripts for later execution.
Guides on creating a diagnostic partition on the hard disk for running tests.
Explains how to view a summary of test results, including pass/fail status.
Describes how to print the results of diagnostic tests.
Lists the necessary tools and supplies for performing server maintenance procedures.
Outlines important ESD precautions and pre/post-installation steps for component replacement.
Details the procedure for safely powering down the server and accessing its internal components.
Identifies the physical locations of key internal server components.
Step-by-step instructions for replacing various customer-replaceable units (CRUs) like I/O board, memory, etc.
Lists the physical dimensions and weight of the server in both British and metric units.
Provides details on the server's voltage range, frequency, and current requirements.
Outlines the operating and non-operating environmental conditions for the server, including humidity and temperature.
Introduces the SMDC and its role as an optional service processor for system monitoring.
Details the use of the util.exe utility for initial configuration of the SMDC.
Provides procedures for setting up the SMDC for console redirection using IPMItool.
Instructions for configuring a PXE server to serve the Supplemental CD image for bootable diagnostics.
Explains how to boot from the PXE server to access the Supplemental CD on the target server.
Details the process of flashing the system BIOS remotely using a PXE server and script.
General| Manufacturer | Sun Microsystems |
|---|---|
| Model | Sun Fire X2100 |
| Form Factor | 1U Rackmount |
| Processor | AMD Opteron 1000 Series |
| Maximum Processors | 1 |
| Memory Slots | 8 |
| Operating System Support | Solaris, Linux, Windows |
| RAID | Optional RAID support |
| Network | 2 x Gigabit Ethernet |
| Power Supply | 400W |
To Next Page
