4-1
CHAPTER
4
Maintaining the Sun Fire X2100
Server
This chapter describes how to add, replace and configure components in the Sun
Fire X2100 Server server.
This chapter contains the following sections:
■ Section 4.1, “Tools and Supplies Needed” on page 4-1
■ Section 4.2, “Installation Precautions” on page 4-2
■ Section 4.3, “Powering Off the Server and Removing the Cover” on page 4-3
■ Section 4.4, “Locations of Server Components” on page 4-5
■ Section 4.5, “Customer-Replaceable-Unit Replacement Procedures” on page 4-6
To determine and isolate a faulty component, refer to Chapter 3.
4.1 Tools and Supplies Needed
You need the following tools and supplies for performing Sun Fire X2100 Server
maintenance procedures.
■ #2 Phillip screwdriver
■ Antistatic wrist strap and mat
■ Alcohol pads (for CPU replacement only)
To Next Page
Loading...
