Chapter 3 Diagnostics 3-9
To load one of the scripts available to test the devices on your system, do the
following:
● From the main menu, select Immediate Burn-in Testing.
The top portion of the window lists the options described in
TABLE 3-3, and the
bottom portion of the window lists the following Burn-in menu options:
■ Load Burn-in Script
Enter one of the following:
■ quick.tst, noinput.tst,orfull.tst
■ If you have created and saved your own script, enter d:\testname.tst
Where testname is the name of the script that you have created.
■ Save Burn-in Script
To save a burn-in script that you have created, enter d:\testname.tst
Where testname is the name of the script that you have created.
■ Change Options
Opens the Burn-in Options menu, which enables you to modify the various
options listed in
TABLE 3-3 for the currently loaded test script.
■ Select Tests
Opens a listing of the tests available for your server configuration and the
currently loaded test script.
■ Perform Burn-in Tests
Starts to run the currently loaded burn-in test script.
3.5 Deferred Burn-in Testing
You can use the Deferred Burn-in Testing option to create and save your own scripts
to run at a later time.
● From the main menu, select Deferred Burn-in Testing.
The top portion of the window lists the options described in
TABLE 3-3, and the
bottom portion of the window lists the following Burn-in menu options:
■ Load Burn-in Script
Enter one of the following:
■ quick.tst, noinput.tst,orfull.tst
■ If you have created and saved your own script, enter d:\testname.tst
Where testname is the name that you have created.
To Next Page
Loading...
