showcod(8)
308 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
The output shown is what you would see if you had platform privileges.
EXIT STATUS The following exit values are returned:
SEE ALSO setcod(8)
XSCF> showcod
Chassis HostID : 81000001
PROC RTUs installed : 8
PROC Headroom Quantity : 0
PROC RTUs reserved for domain 0 : 4
PROC RTUs reserved for domain 1 : 0
PROC RTUs reserved for domain 2 : 0
PROC RTUs reserved for domain 3 : 0
PROC RTUs reserved for domain 4 : 0
PROC RTUs reserved for domain 5 : 0
PROC RTUs reserved for domain 6 : 0
PROC RTUs reserved for domain 7 : 0
PROC RTUs reserved for domain 8 : 0
PROC RTUs reserved for domain 9 : 0
PROC RTUs reserved for domain 10 : 0
PROC RTUs reserved for domain 11 : 0
PROC RTUs reserved for domain 12 : 0
PROC RTUs reserved for domain 13 : 0
PROC RTUs reserved for domain 14 : 0
PROC RTUs reserved for domain 15 : 0
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
Need help?
General
