showdevices(8)
332 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
When memory is being disconnected, the following items are displayed:
I/O devices:
Privileges You must have one of the following privileges to run this command:
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported.
target XSB XSB number at the move destination
deleted mem Size of memory which was already deleted (MB)
remaining mem Size of remaining memory to be deleted (MB)
device Instance name of I/O device
resource Managed resource name
usage Description of the instance using resources
query Results of an off-line inquiry about resources
platadm, platop, fieldeng
Can run this command for all domains.
domainadm, domainmgr, domainop
Can run this command only for your accessible domains.
-d domain_id Specifies the ID of the domain for which information is to be
displayed. domain_id can be 0–23 depending on the system
configuration.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-p byboard Displays results organized by XSB. The results can be further
summarized by device and displayed. If the -p option is omitted,
"-p bydevice" is used.
-p bydevice Displays results organized by device type (CPU, memory, I/O,
etc.). If the -p option is omitted, "-p bydevice" is used.
To Next Page
Loading...
Need help?
General
