Sun Telecom ST800 - Receiving and Reading Messages

10. RECEIVING AND READING MESSAGES
RECEIVING AND READING MESSAGES
The pager will emit an audible alert or
vibrate(depending on the alert setting mode)
when a message is received. The pager will
also display the number of unread messages.
If there are two unread messages, the pager will
display as <Fig.10a>.
Press the READ button to display the first
message(Fig.10b).
Press the READ button to advance to the
display the message arrival time(Fig.10c).
If no message is received, pressing the READ
button will cause the pager to display as
<Fig.10d>.
< Fig.10a >
< Fig.10b >
< Fig.10c >
< Fig.10d >