Sun2Solar 475175 User Manual

1
Sun2Solar® Above Ground Solar Reel
(model # 475175 & 475179)
Read and follow all instructions. Locate and verify you have all parts before starting.
Parts List:
A)
2 – Wheel Handles (BSP34)
B)
2 – Hubs (BSP33)
C)
2 – Supports (Yolk) (BSP45)
D)
2 – Bases (BSP37)
E)
4 – Top Rail Attachments | 2-Right,
2-Left (BSP38)
Hardware Pack Includes:
F) 4
– Bearing Casing Tubes (BSP43)
G) 4
– Bearing Pins (BSP44)
H) 8
– Straps (BSP42)
I) 16
– Cover Clips (BSP40)
J) 16
– Plastic Nuts
K) 16
– Plastic Bolts
L) 20
– 1 ½” hex washer head screws
(BSP39)
M) 12
– ¾” screws (BSP41)
N) 2
– 1” screws (BSP35)
WARNING
AVOID DROWNING RISK
•
Do not sit or stand on reel system
• Stay off cover – will not support weight
• Do not attempt to stand on cover
• Keep children and pets away – children
and pets cannot be seen under cover
• Remove standing water
•
Children can drown on top of cover
• Remove cover(s) completely before entry of
bathers – entrapment is possible
• Non-secured or improperly secured covers are a
hazard
• Do not allow anyone to swim under the cover
• Failure to follow all instructions may result in
injury or drowning

Sun2Solar 475175 Specifications

General

Brand	Sun2Solar
Model	475175
Category	Lighting Equipment
Language	English

Summary

Safety Warnings

General Safety Precautions

Key safety guidelines for using the solar reel system and cover to prevent injury or drowning.

Assembly Instructions

Tube Kit Assembly

Instructions for assembling the telescoping tube kit for the solar reel.

Pool Size and Reel Placement

Guidance on selecting the correct reel size and placement based on pool dimensions.

Tube Assembly and Overlap

Details on joining tubes, ensuring proper overlap, and drilling pilot holes for screws.

Hub to Tube Attachment

Steps for attaching the hubs to the assembled tube assembly using screws.

Wheel and Hub Assembly

Instructions for connecting the wheel handles to the hubs and tube assembly.

Reel Base Installation

Guidance on positioning and attaching the reel base to the pool's top rail.

Yolk and Bearing Assembly

Steps for assembling the yolk, bearing casing, and pins for the reel.

Strap Attachment to Tube

Procedure for attaching straps to the tube assembly, including spacing and drilling.

Cover to Strap Attachment

How to attach the solar cover to the reel straps using clips and bolts.

Maintenance and Care

Storage and Cleaning

Guidelines for storing the reel when not in use and cleaning procedures.