EasyManua.ls Logo

Sun2Solar 902534 - Troubleshooting

Sun2Solar 902534
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Trouble Shoong
Problem Cause / Soluon
The pool does not
warm up
• Make sure that water is owing through the hoses
• Has it been sunny enough?
• Exploit the maximum amount of sunlight and increase the running
me of the lter pump
• Cover your pool overnight to avoid loss of heat
• It is possible that you may need several solar collectors
No bubbles appear aer the
equipment has been aached
to the pump
• Check the lter system and ensure that water from the pool is
owing through the lter pump, then through the solar collector
and nally through the connector house back to the pool
Air bubbles come out of the
pool return aer the pump has
been turned on
• Check the connector hoses for any damage
• Check that the hose clamps have been properly ghtened
Water escaping
• Check the seals in the systems of pipes
• Check whether you have ghtened the hose clamps ghtly enough
• Check the connector hoses for any cracks
Intex® is a registered trademark of the Intex® Recreaon Corp.
There is no aliaon or relaonship between Sun2Solar® and Intex® Corp.

Related product manuals