-9-
MAINTENANCE AND CLEANING
Before cleaning your iron, always make sure that it is disconnected from the
electrical wall socket and is completely cool.
SOLEPLATE
• Residue on the Soleplate can be wiped off with a cloth soaked in a solution
of water and vinegar.
• Do not use scouring pads, abrasives or chemical cleaning solvents as they
may damage the finish.
HOUSING
• The housing can be cleaned with a moist cloth and then wiped dry.
• Other than the recommended cleaning, no further user maintenance should
be necessary. If for any reason your iron should require repairs, do not try to
fix it yourself.
STORING THE IRON
1. Turn off the iron and disconnect the plug from the electrical wall
socket.
2. Set the iron in an upright position and let it cool down completely.
3. Set the Steam Select Switch to the closed position .
4. Empty out all the water remaining in the Water Reservoir by opening
the Water Reservoir Lid and inverting the iron over the sink.
5. The Power Cord can be wound around the Heel Rest for easier and
tidy storing once the unit has cooled down. The iron should always
be stored in an upright position.
To Next Page
Loading...
