-5-
DRY IRONING
1. Insert the plug in the electrical wall socket.
2. Make sure that the Steam Select Switch is in the closed position.
3. After the Indicator Light goes off, you may start to iron.
STEAM IRONING
Steam ironing is only possible at high temperatures (silk, wool, cotton, linen),
as indicated on the Temperature Control Dial
(Figure 3).
1. Be sure that there is enough water in the
Reservoir.
2. Set the iron in an upright position.
3. Plug the steam iron into the wall electrical
outlet.
4. Turn the Temperature Control Dial to
the desired position within the range of
temperatures included in the steam area
of the dial.
5. Wait until the Indicator Light has turned off
after lighting up.
6. Set the Steam Select Switch to the desired steam level position. You are
now ready to start steam ironing. The steam will be released evenly through
vents located in the soleplate for easier ironing.
SPRAY MIST
The Spray Mist feature is a powerful water spray mist that dampens the fabric
to help remove wrinkles from heavy fabrics and to set creases.
Press the Spray Mist button firmly to start the spray.
(Figure 3)
To Next Page
Loading...
