1.
2.
3.
4.
5.
6.
7.
6.
9.
DO Read instructions carefully before using Monitor.
DO Rest arm on a flat surface so that upper arm is at heart level when
taking measurements.
DO Remain calm, quiet and still when measurements are being taken,
DO make sure that the cuff is in the proper position according to your
instruction manual.
DO Insure that the exhaust velocity is 2-5
mmHg
per second at the systolic
point each time a measurement is taken.
DO Wait at least 10 minutes between taking measurements.
DO Pump unit pressure 30 to 60
mmHg
above normal systolic before
beginning measurement.
DO Consult your physician before adjusting your medication based on
readings from this Monitor.
DO Use fresh alkaline batteries.
10. DO Use a dry, soft cloth to clean the instrument.
To Next Page
Loading...
Need help?
General
