6
Using the Rotisserie Handling Fork
To insert the rotating mesh basket or rotisserie spit:
1. Place the desired accessory on the
Rotisserie Handling Fork.
2. Insert the left side of the accessory
shaft into the Rotisserie Holder. Be sure
the shaft is engaged and in place for
rotation.
3. Place the right side of the shaft onto the
right Rotisserie Holder.
Note: Basket should not be able to freely
rotate when it is fully engaged.
To remove the rotating mesh basket or rotisserie spit:
1. Insert the Rotisserie Handling Fork
beneath the shaft of the accessory.
2. Lift the right side of the Rotisserie
Handling Fork at an angle to remove it
from the right Rotisserie Holder.
3. Then shift the Rotisserie Handling Fork
to the right to allow the left side of the
shaft to slide out of the left Rotisserie
Holder.
Usage Instructions
To Next Page
Loading...
