8
Using the control panel (continued)
Once the espresso machine is heated to
the correct temperature, the temperature
indicator line will stop flashing and and
'READY' will appear on the LCD, the coffee
maker is then able to use the espresso
machine.
The coffee maker simply needs to turn the
operating dial anticlockwise to the espresso
setting to start the pour and turn it back to
the off position to stop.
Steam
When the espresso machine is switched
on and the espresso machine is in steam
mode, the red light on power button and
the orange light on the steam button will be
illuminated.
Note: Should the espresso machine not
be in steam mode, so the orange light on
the steam button is not on, the coffee
maker needs to press the steam button
to activate the steam mode. By design the
temperature of the espresso machine will
adjust as necessary.
Once the espresso machine is heated to
the correct temperature, the temperature
indicator line will stop flashing and and
'READY' will appear on the LCD, the coffee
maker is able to use the espresso machine.
The coffee maker simply needs to turn the
operating dial clockwise to the steam setting
to start and turn it back to the off position to
stop.
To Next Page
Loading...
Need help?
General
