Sunbeam CAFE LC9000 - Page 14

#LOSESTORAGEDRAWERSEEFIGURE
Processing bowl storage, see figure 14.
1. Place the processing bowl onto the base of
the food processor.
2. Fit the spindle over the drive shaft.
&ITTHELARGEUNIVERSALgSgBLADEOVER
spindle.
0LACETHESMALLBOWLINSIDETHELARGEBOWL
0LACETHEg6ARIABLE3LICINGgBLADEOVERTHE
spindle and then fit the processing cover to
the processing bowl.
Cord storage
The power cord can be stored by pushing it
into the back of the motor base,
see figure 15.
Fig 15
Fig 14
Storing your Café Series
®
Food Processor continued
Fig 13
14