5. Secure the juicer cover by raising the twin-locking
handles and clip the tops to the juicer cover – figure
5a. Press firmly on the lower part of the twin-locking
handles to lock into place – figure 5b.
6. Slightly tilt the pulp container and slide into place
under the juicer cover – figure 6.
Tip: To reduce cleaning we recommend that you line the
pulp container with a plastic bag to collect the pulp.
7. Take the food pusher, align the groove on the food
pusher with the notch on the inside of the feed chute
and slide the food pusher down into the feed chute
– figure 7.
8
Assembling your Café Series
™
Juice Extractor (continued)
Figure 6
Figure 7
Figure 5a Figure 5b
To Next Page
Loading...
