10
Pan Tilt Lever
The pan tilt lever is positioned under the
inlet where the control probe is inserted. To
tilt the frypan, push the lever down. This
allows the fat and juices to drain from the
food for crisp, low fat cooking. It also makes
it easier to basté food and serve sauces or
gravy. See figure 2.
Cast-in element
The element is completely cast into the
aluminium base for faster superior heating
and a longer element life. See figure 3.
The heating element is completely cast into
an aluminium base, which is adhered onto
the stainless frypan providing superior heat
distribution. See figure 4.
Temperature settings of your Sunbeam cookware continued
Figure 4
Figure 3
Figure 2
To Next Page
Loading...
