Sunbeam heated bedding - Quick Set-Up Guide; Twin;Full Single Control Setup; Base Unit Remote Control Setup; Queen;King;California King Dual Control Setup

Control
Flag Tag
Label
Power Cord
Module
Left Side
Right Side
Control Cord
Connector
Left (Secondary)
Control
Flag Tag
Label
Power Cord
Module
Left Side
Right Side
Right
(Primary) Control
(Label on back
of control)
Control Cord
Connector
E4
For questions or support, please visit www.sunbeambedding.com.
TWIN/FULL
SINGLE CONTROL SET-UP
STEP 1
Place on bed with
label at foot of bed
facing out
STEP 2
Connect the Control
Cord connector and
module securely
STEP
3
Run Control Cord
under the bed
STEP
4
Plug Power Cord
into wall
QUEEN/KING/CALIFORNIA KING
DUAL CONTROL SET-UP
STEP 1
Place on bed with
label at foot of bed
facing out
STEP 2
Connect the Control
Cord connector and
module securely
STEP
3
Run Control Cord
under the bed
STEP
4
Plug Power Cord
into wall
QUICK SET-UP GUIDE
Mattress Pad & Blanket
1
3
2
4
BASE UNIT FOR
REMOTE CONTROL
SET-UP
Run Base Unit Cord under the bed
Module
Sunbeam HeatedBedding IB_17ESM1.indd 4 2/3/17 09:09